Change country

Understand your tire

Reading your tire

Fulda Tire Sidewall

Reading your tire

All the important information you need to know about your tire is printed on the sidewall.

Reading this information will help you to maintain your tires, and to choose new ones when the time comes for a replacement set.

Our guide will help you to understand what the different numbers and letters mean.

Fulda Tire Width

Tire width

Your tire’s width from sidewall to sidewall, measured in millimeters.

Fulda Tire Sidewall

Tire type

If you see a letter “P”, or you see no letter at all, this indicates a passenger tire.

Fulda Tire Aspect Ratio

Aspect ratio

This number is a percentage that represents the ratio of the tire’s width to its cross-section. You’ll see in our example a tire with an aspect ratio of 65, which means that the tire’s height is 65% of its width.

Fulda Tire Construction - Radial


The letter “R” is used to represent a radial tire. Nearly any tire built today falls into this category

Fulda Tire Diameter

Wheel diameter

The wheel’s width from end to end.

Your tire’s load index tells you its maximum carrying capacity

Load index

Your tire’s load index tells you its maximum carrying capacity. It’s important to choose a replacement tire that fits with your manufacturer’s recommendations.

Load ratings and speed ratings should be looked at together when you choose a tire. You’ll find the load rating of your current tire on the sidewall, just beside the diameter.

The speed rating is the maximum speed a tire can legally support

Speed Rating

The speed rating is the maximum legal speed for a tire when it is correctly inflated and in use under load.

You will find your tires speed rating printed on the sidewall, and represented by a letter. A tire with a speed rating of V, for example, has a maximum speed of 240 km/h.

When buying replacement tires it is essential to match their speed rating with the speed capabilities of your vehicle.

Check out the maximum speed allowed by inputting your speed index into the application.

Fulda Tire Sidewall

ECE approval mark and number

The United Nations Economic Commission for Europe (U.N.E.C.E) has set standards for pneumatic tires. This mark and number shows that your tire conforms to these standards.

Fulda Tire Sidewall

Tire pressure information

Tire pressure information: Your tire has a maximum inflation pressure. It’s important to know this when you’re checking your tire pressure. You should also be sure to check your manual for information about the correct inflation pressure for your tire and vehicle.

Fulda Tire Sidewall

Tread wear indicators

The location of the tread wear indicators is represented by the letters “TWI”.
It’s important that your tread be of a sufficient depth, at least the EU legal minimum of 1.6mm. Make a habit of checking these indicators often.

Fulda Tire Sidewall

Production date

This four-digit code shows the week and year your tire was produced.